Please select your home edition
Edition
Upffront 2020 Foredeck Club SW LEADERBOARD

Furling Drum Locks - to lock, or not to lock?

by Kerri Robson 3 May 2019 08:00 UTC
Furling Drum Locks © Facnor

There is somewhat of a debate over the use of drum locks on a continuous line furling drum. As it says on the tin, a drum lock is designed to lock a continuous line furling drum in place, in order to prevent accidental unfurling which can be inconvenient and potentially dangerous.

There are plenty of conventional options available to keep your sail furled when it is not in use, or during hoisting and dropping:

Velcro

Commonly used for code zeros on boats up to 40 - 45ft, the code zero has a Velcro clew pad which sticks to itself when the sail is fully furled - in the right direction! However, this is not ideal as the sail must always be furled accurately and the Velcro isn't always reliable.

Rope Bight

Depending on the drum manufacturer, another neat way to lock the furler is to pass a bight (bend) of furling line rope through one of the lightening holes in the drum.

This is obviously only possible where there is a gap in the body of the furler, plus it requires there to be slack in your furling line - as well as a trip up to the foredeck!

Furling Line Jammer

To hold a continuous furling line securely in place, it is possible to cleat it on both sides of the loop. Selden have a good double block/cleat specifically designed for this purpose, and it provides a nice safe system when the sail is not in use.

Horn Cleat

Probably the simplest and safest way to secure a continuous furling line to prevent the sail unfurling is to take the end of the loop and hitch it around a horn cleat.

However, all the above are solutions for securing a fully furled code zero or asymmetric. The role of a drum lock is quite different - it is designed as a temporary safety mechanism to prevent an accidental unfurl during a manoeuvre.

Imagine the scenario: you are half way through furling in the code zero and you spot your favourite, double grip, winch handle on the opposite side deck, just about to plop overboard. What do you do? Drop the furling line and let the sail unfurl, risking expensive sail damage... or save the sail and lose the handle!?

This is where the automatic drum lock comes into its own, allowing you to save both the sail and the handle! You can literally 'drop' the furling line and the lock will automatically engage, holding the drum whilst you grab the handle. Then you can come back to the furling line and quickly resume the furl.

When using a furling drum lock, it is important to remember that they are only intended as a very short-term safety device, not a secure way of holding the drum for long periods. They should also never be used as a reefing system the lock mechanisms are not designed to take this type of load.

It sounds like a sensible feature why wouldn't I have one?

The downside of the drum lock is that they add a layer of complexity to an otherwise very simple system. Some drum locks only work in one direction which means you always have to be conscious of the direction of furl. Plus there is the additional reliability risk and the possibility that a faulty drum lock actually prevents you from completing a furl.

Ultimately, for cruising and shorthand sailing, upffront.com would definitely recommend a drum lock as a valuable temporary safety mechanism, and a great addition to your furling system for increased peace of mind.

However, for racers and fully crewed boats we would suggest a drum lock is not needed in fact, a lot of racers remove it, as the potential downsides outweigh the benefits.

Considering adding a drum lock to your continuous line furling drum? Browse our range of continuous line furlers here or get in touch with us using our 'Furling Enquiry' form.

Related Articles

The Low-Down on High-Load Dinghy Blocks
Allen, Harken, Ronstan and Morf compared At upffront.com we love looking at the data and comparing products to gain insight. In this blog we look at the rapidly evolving world of high-load dinghy blocks and compare leading products on the market from Allen Brothers, Harken, Ronstan and Morf. Posted on 26 Jun
Spinlock's XTX available at upffront.com
The latest innovation in rope holding Widely known as experts in rope holding, Spinlock is the go-to solution for many sailors when it comes to clutches and jammers. We've been looking forward to the launch of their new product, the XTX Clutch, ever since we got our first look at METS 2019. Posted on 19 Jun
Ubi Maior X3M Flight Blocks
The compact high flyer reviewed by upffront.com Where does the Ubi Maior X3M Flight range sit relative to other blocks? Posted on 12 Jun
Allen Brothers overview from upffront.com
Dedicated to manufacturing excellence We are pleased to introduce the Allen Brothers 20mm and 30mm Dynamic Block ranges on the website and decided to take the opportunity to have an in-depth look at this fascinating UK manufacturer of performance dinghy hardware. Posted on 5 Jun
nke - Finding Their True Course
Upffront.com look at these high quality, precision navigation instruments nke is a specialist marine electronics manufacturer which has built a reputation, over 35 years, for high quality, precision navigation instruments for sailing yachts. Profiling companies like this is part of Upffront.com's raison d'être. Posted on 28 May
Ewincher - An alternative to electric winches?
A power-assisted winch handle requires no installation Electrification of winches can be a great benefit; reducing the strength and manpower needed on your boat and allowing many to sail short-handed or continue sailing longer in life. Is the Ewincher a viable, cost-effective alternative? Posted on 11 May
Extend your reach with Ronstan
The Battlestick is the self-professed 'next generation of sailing weaponry' Ronstan is an Australian born company who has developed hardware for both small and big boats since 1953. In this article we will look at their extensive range of tiller extensions which have become a brand in their own right: the Ronstan Battlestick. Posted on 30 Apr
Bamar's got your back... stay!
Looking to upgrade from a block and tackle system to a backstay tensioner? Looking to upgrade from a block and tackle system to a backstay tensioner? This blog will look at the Bamar BTV and BTM mechanical backstay tensioners and compare them with alternatives on the market. Posted on 23 Apr
PROtect Tapes SPK: Wooling spinnakers
An environmentally friendly and innovative system for solving an old problem PROtect Tapes provide solutions for the owners, boat captains and race teams who recognise that protecting the boat and reducing maintenance plays an important role in enhancing performance. Posted on 15 Apr
Harken Reflex Furler
Always adapting to stay ahead of the game Blocks, winches, travellers and a whole range of other systems... Harken has been a market leader in the sailing industry for over 40 years and is a household name among sailors. Posted on 9 Apr
Upffront 2020 Foredeck Club SW FOOTER