Please select your home edition
Edition
Upffront 2020 Foredeck Club SW LEADERBOARD

Cleats, Clutches and Jammers - What's the difference?

by Kerri Robson 14 Jun 2019 08:00 UTC
Rope Clutches © Ronstan

When it comes to purchasing new sailing hardware, there are a plethora of options available. However, whilst some hardware has a clear place and purpose on a boat - such as hanks, locks and blocks - when it comes down to choosing between a cleat, clutch or jammer it can be hard to know which to go for.

The following guide will examine cleats, clutches and jammers in turn, to enable you to determine the best option for securely holding a line on your boat.

Cleats:

A cam cleat features two spring-loaded cams which pinch and hold the rope between metal teeth.

Ideal for small boats, cam cleats can accommodate relatively low loads, and are often the primary rope holding device on dinghy's and small keel boats, or used within a purchase system on bigger boats.

To release the line, simply pull the line upward and out of the cleat. This mechanism allows the rope to be adjusted easily, and the line can be quickly released under load.

Cam cleats are therefore well suited to dynamic lines - such as sheets and control lines - and can be quickly released in an emergency.

When to Choose a Cleat:

  • For lines that are constantly adjusted or trimmed by hand
  • For dynamic lines on small boats - e.g. control lines or sheets
  • For relatively low loads

Clutches:

A rope clutch uses a toothed cam which is controlled by a handle. When the handle is down, the cam is engaged and the toothed plate keeps the rope in place. To fully release the line, simply open the clutch handle.

Clutches are ideal for controlling medium loads, and are therefore used extensively on medium sized boats. As a rule of thumb, choose a rope clutch when you would use a cleat, but the load is higher; with a clutch, it is possible to lock off a halyard, main, jib or even spinnaker.

Like a cleat, a rope clutch allows easy trimming and adjustment (lines can be pulled in with the clutch closed) and, in an emergency, a fully loaded line can be quickly released without the need for a winch. Having said that, in most situations it is better to take the loaded line onto a winch as a precaution, before releasing the clutch and also to minimize wear and tear.

As a clutch is more complex than a cleat, there are more moving parts - and so more maintenance is required. Explore our guide on the Spinlock rope clutch range.

When to Choose a Clutch:

  • For lines that are regularly adjusted
  • For lines on medium boats - e.g. halyards
  • For medium loads

Jammers:

Finally, a jammer works in much the same way as a clutch, but the handle cannot be released whilst under heavy load.

Instead, the load in the line must first be taken to a winch and tensioned so all the load is now off the jammer, and only then can the handle of the jammer be pulled out and the rope released.

As a result, no adjustment is possible, making jammers a good option for permanently loaded lines such as halyards on larger boats.

Arguably slightly more work than a clutch, a jammer is a good choice when the load is high and you need a completely strong, secure and reliable option - sometimes a jammer is the only option that can accommodate high loads on larger boats!

Although there are some safety implications of not being able to quickly release the line, there are relatively few moving parts which results in lesser maintenance of the jammer.

When to Choose a Jammer:

  • For lines that are permanently loaded for extended periods of time
  • For lines on bigger boats - e.g. halyards
  • For high loads

Think you've cracked it? Browse cleats, clutches & jammers, or alternatively get in touch via our contact form for further advice and support.

Related Articles

The Low-Down on High-Load Dinghy Blocks
Allen, Harken, Ronstan and Morf compared At upffront.com we love looking at the data and comparing products to gain insight. In this blog we look at the rapidly evolving world of high-load dinghy blocks and compare leading products on the market from Allen Brothers, Harken, Ronstan and Morf. Posted on 26 Jun
Spinlock's XTX available at upffront.com
The latest innovation in rope holding Widely known as experts in rope holding, Spinlock is the go-to solution for many sailors when it comes to clutches and jammers. We've been looking forward to the launch of their new product, the XTX Clutch, ever since we got our first look at METS 2019. Posted on 19 Jun
Ubi Maior X3M Flight Blocks
The compact high flyer reviewed by upffront.com Where does the Ubi Maior X3M Flight range sit relative to other blocks? Posted on 12 Jun
Allen Brothers overview from upffront.com
Dedicated to manufacturing excellence We are pleased to introduce the Allen Brothers 20mm and 30mm Dynamic Block ranges on the website and decided to take the opportunity to have an in-depth look at this fascinating UK manufacturer of performance dinghy hardware. Posted on 5 Jun
nke - Finding Their True Course
Upffront.com look at these high quality, precision navigation instruments nke is a specialist marine electronics manufacturer which has built a reputation, over 35 years, for high quality, precision navigation instruments for sailing yachts. Profiling companies like this is part of Upffront.com's raison d'être. Posted on 28 May
Ewincher - An alternative to electric winches?
A power-assisted winch handle requires no installation Electrification of winches can be a great benefit; reducing the strength and manpower needed on your boat and allowing many to sail short-handed or continue sailing longer in life. Is the Ewincher a viable, cost-effective alternative? Posted on 11 May
Extend your reach with Ronstan
The Battlestick is the self-professed 'next generation of sailing weaponry' Ronstan is an Australian born company who has developed hardware for both small and big boats since 1953. In this article we will look at their extensive range of tiller extensions which have become a brand in their own right: the Ronstan Battlestick. Posted on 30 Apr
Bamar's got your back... stay!
Looking to upgrade from a block and tackle system to a backstay tensioner? Looking to upgrade from a block and tackle system to a backstay tensioner? This blog will look at the Bamar BTV and BTM mechanical backstay tensioners and compare them with alternatives on the market. Posted on 23 Apr
PROtect Tapes SPK: Wooling spinnakers
An environmentally friendly and innovative system for solving an old problem PROtect Tapes provide solutions for the owners, boat captains and race teams who recognise that protecting the boat and reducing maintenance plays an important role in enhancing performance. Posted on 15 Apr
Harken Reflex Furler
Always adapting to stay ahead of the game Blocks, winches, travellers and a whole range of other systems... Harken has been a market leader in the sailing industry for over 40 years and is a household name among sailors. Posted on 9 Apr
Upffront 2020 Foredeck Club SW FOOTER